12v 100ah Lithium Ion Battery - GBS-LFP100Ah-E - with BMS

  • £750.00
    Unit price per 
Tax included. Shipping calculated at checkout.

12v 100ah Lithium Ion Battery -  x 4 cells only + BMS

12v 100Ah Battery pack consisting of 4 cells+ BMS - Pre-assembled with bus bars

WYSIWYG - What You See Is What You Get

****   UK and Ireland ONLY - Vat included + FREE Shipping  *****


Item Specification
Model GBS-LFP100Ah-E
Pole screw hole 4 holes
Rated capacity 100Ah
Nominal voltage 3.2V
Internal impedance ≤0.4mΩ
Standard charge rate 0.25C
Fast charge rate 1.0C
End of charge voltage 3.65V
Standard discharge rate 0.5C
Max discharge rate 1.0C
Instantaneous discharge rate 3C ( 10s )
End of discharge voltage 2.9V
Working temperature -20~65℃
Cycle life 3000 cycles ( 0.5C )
Weight 2.3±0.1kg
Dimension 126×51×223±1mm
Shell PP


Basic Performance


(1) Output with high efficiency: Standard discharge current is 0.3C-0.8C, instant impulse discharge current is 10C for 10 seconds.

(2) Good performance under high temperature, it could work under 65°C temperature.The battery structure is safe and good.

(3) Good performance under low temperature.discharge capacity decreases to over 90% under 0°C and discharge capacity decreases to over 70% under -20°C.

(4) Good safety performance:When the pressure inside the battery is too large, the one-way safety valve will release gas and heat to make sure battery perform well. When the internal pressure reaches a certain level, the valve will be open immediately which can protect the battery from burning and explosion.

(5) Good cycle life time, the discharge capacity is still over 80% after 3000 cycle times of single cell(80%DOD).

(6) It can fast charging. It could be charged to 80% within 0.5h and charged full with 2-3h.

(7) No pollution during manufacture and usage.


Matters Needing Attention

(1) Please check if spare parts are completed when open the package and read the operation manual carefully.

(2) Do not make the battery Short Circuit,do not over charge and discharge.

(3) Please charge the new battery to full capacity before discharge for the first use.

(4) The battery pack is fixed with plate and strip before delivery, do not disassemble the plate and strip when using the battery.

(5) Checking the voltage of battery, normally it is 3.2V-3.3V.

(6) Fix BMS for battery pack and protect single cell to avoid over charge and over-discharge.

(7) Rivet or screw is used for battery connector.

(8) Please use copper part to connect battery packs and fix with hydraulic pressure plier. We could also provide the relevant connection which fixed with screws.

(9) The charger used should be approved by our company in order to match with our lithium batteries.

(10) It will shorten battery cycle lifetime and damage battery due to overcharge and over-discharge if not do according to the above. It won’t be within our company warranty.

Detail Information

Type: Lifepo4 Warranty: 2 Years
Cycle Life: 3000 Times Nominal Capacity: 100Ah
Nominal Voltage: 3.2V Connector: Busbar, Lug, Screw, Bolt